Your ultimate guide to Canon Pixma Tr4520 Setup

Published by Kevin Miller on

Canon Pixma Tr4520 Setup

A printer will surely make your life easier but it might take a while to understand it completely. If you have bought a Canon Pixma Tr4520 setup then you will have to set it up initially before you can start with the printing process.We will be covering the following points so that you won’t have to browse through a number of links to find an answer to your queries:

  • Canon  TR4520 Print Setup

Canon Pixma Tr4520 setup

  • Pixma TR4520 Copy Setup

Canon Pixma Tr4520 setup

  • Canon Pixma TR4520 Scan Setup

  • Canon Pixma TR4520 Fax Setup

  • Troubleshooting- Canon Pixma TR4520 Printer Not Working

Start Easy canon Pixma TR4520 Print Setup

  • Turn on your printer
  • Open the input tray and put the A4 sheets in the tray
  • Make sure that the sheets are aligned before you place them
  • Download and install the drivers on the system
  • Choose the important print settings
  • Once you have checked the settings, click on ‘apply’ in order to make changes
  • Choose the paper size and extra features as per the values
  • Choose the printing quality and let the printer do the printing
  • The settings will be saved when you choose print operations with the existing setting operations


Start Easy canon Pixma TR4520 Copy Setup

  • Turn on your printer and then follow the instructions to start the primary setup process
  • Add the number of sheets that you require in the input tray
  • Put the original document on the scanner bed
  • Click to copy and you can choose the color as per your preference
  • Select the number of copies as per your need and you can choose the copy standards as well
  • Preview the docs and then click on ‘Ok’
  • If you wish to stop the process then you can do that by clicking on ‘stop’
  • Take out the original copy of the document once the process has been done

Canon Pixma TR4520 Scan Setup 

  • Turn on your printer and system
  • Do all the necessary printer settings
  • Pull up the lid of the scanner and clean the surface
  • Put the original doc on the scanner bed so that the scanning process can start
  • Once you have put in the documents, you can close the scanner lid
  • Click on ‘scan’ and you can scan the pages with the color of your choice
  • Choose a location on the system to save the scanned docs and you can access it from there


Canon Pixma TR4520 USB Connection Setup 

  • Download the apt drivers from the manufacturer’s website
  • Run the setup file in order to install it on the operating system
  • Follow the instructions shown on the screen to install the drivers successfully
  • While you are doing the installation process, you will be asked the method to connect
  • Choose USB as the connection method and proceed with the configuration
  • Use your USB cable to connect the Canon PixmaTR4520 to the operating system
  • Wait for the connection to take place and you can do the changes if required
  • Open the document that needs to be printed and check if the connection has been successful or not


 Pixma TR4520 Wireless Connection Setup 

  • You can also use the Canon Pixma TR4520 by using a wireless connection
  • Make sure that the printer is turned on before you start
  • Once it has been turned on, an alignment process will be performed
  • Go to the LAN settings and click on ‘wireless direct’ on the screen to turn it on
  • Complete the setup process on the system
  • Install the drivers by following the instructions that you see on the screen
  • During the process, choose ‘wireless’ as the connection type and configure the setup


Troubleshooting- Canon Pixma TR4520 Printer Not working 

  • Make sure that the printer is connected to the power source and it is switched on
  • Connect the Canon Pixma TR4520 printer to the system
  • If you are connecting it via the wire then see if it has been plugged in correctly or not
  • Once the process has been completed, restart the system and the printer
  • Try printing and see if the issue has been resolved or not


Troubleshooting- Canon Pixma TR4520 Wireless Setup Issue 

  • Make sure that the printer has been switched on
  • See if the driver has been connected to the correct port or not
  • Go to the LAN settings and click on ‘wireless connection’
  • Ensure that the WIFI button on the panel is turned on
  • Assign the printing tasks to the Canon Pixma TR4520


If there is anything else that you would like to know regarding the Canon Pixma Tr4520 then you can connect with us for immediate assistance.

Call Me